Image Surfaces

AT REF

Acoustically Transparent Reference is a unique knitted image surface supporting reference acoustical and visual performance. AT Ref delivers crisp vibrant images with almost no impact on sound transfer. Available on screen heights up to 1.9m.

Gain: 0.93
EQ Curve: Tilt +1.5dB from 2kHz to 20kHz including AT Back
Surface structure indistinguishable from approximately 0.5m.

AT XL

Acoustically Transparent XL is a woven image surface supporting reference acoustical and visual performance in very large systems. AT XL delivers sharp vibrant images with minimal impact on sound transfer. Available on screen heights up to 4.5m.

Gain: 0.89
EQ Curve: Tilt +2.5dB from 2kHz to 20kHz including AT Back
Surface structure indistinguishable from approximately 2.0m.

AT MASK

Acoustically Transparent Mask is a deep black version of AT Ref which is used for contrast enhancing black backing behind the AT Ref image surface and as screen masking on the Dynamic series.

With almost no impact on sound transfer but with very low reflectivity, AT Mask is the ideal choice to frame the image surface.

AT BACK

Acoustically Transparent Back is a lightweight semi plush fabric which is used for contrast enhancing black backing behind the AT XL image surface.

The deep black and light absorbing finish enhance video performance with negligible impact on sound transfer.

Hardware

MASK POSITION LOGIC

DT Screens Mask Position Logic is a combination of technologies for easy and accurate masking. The screen masking control system is factory programmed with the width, height and masking configuration of the screen.

A special sensor accurately measures the position of the mask bars and reports that to the screen masking control system which uses that data to precisely position the masks at any aspect ratio from 1.33 to 2.76:1 depending on the masking configuration.

WHISPERTEC MOTOR

DT Screens unique WhisperTec motors have been designed specifically for our Dynamic series. Each heavy-duty motor runs at less than 30dB for smooth and quiet operation for the lifetime of the screen.

FRONT LOADING IMAGE SURFACE

All DT Screens image surfaces are mounted from the front and only once the screen is securely attached to the wall.

VEBLACK MAGNETIC FRONT FRAME

DT Screens Frontier and Dynamic series feature magnetically mounted front frames clad in our veBlack light absorbing material. The magnetic front frames mount after the image surface enabling easy installation and removing the need to install these elements until the very end of the project.

SILENT GLIDE LINEAR MASK BEARINGS

Dynamic series masks are mounted securely to silent and smooth running linear bearings. This ensures the quietest and most accurate masking solution possible with no judder or loss of mask alignment.

CONSTANT TENSION MASK SYSTEM

Dynamic series masks are pulled towards the center of the screen using our innovative constant tension system. Each end of the masking bar has exactly equal force applied to it ensuring no loss of mask alignment and easing the work of the WhisperTec Motors.

FLOATING ANTI-JAM MASK BAR

Dynamic series use a special mask bar that is designed to avoid flex whilst remaining compact. This mask bar is fitted to a 3D printed mounting interface which allows the bar to float. Critically, this allows the mask bar to easily self adjust for best motion avoiding judder and loss of alignment.