fbpx

01

Image Surfaces

ATPro

Acoustic Transparent Professional Image Surface from DT Screens is a knitted surface using an ultra-fine filament which delivers perfect flatness, uniformity and an outstandingly consistent spectral response. Knitted projector screens are inherently robust and suited to being mounted under tension.

ATPro is supplied as a system with a separate identical black backing layer for enhanced contrast and no light transfer to the surface behind the screen. All measurements made as system with both layers in place.

ATPro Key Data | view full datasheet

Material Type: Front Projection
Maximum Size: 5m x 50m Seamless
Peak Gain: 0.91
Half Gain: Lambertian Diffuser
Minimum Throw Distance: No Minimum
Edge Blending Properties: Excellent
Required Audio EQ Pending

ATRef

Acoustic Transparent Reference Image Surface from DT Screens is a knitted surface using a wider filament which is then flattened using heated rollers delivering perfect flatness, uniformity and exceptional acoustic transparency. Knitted projector screens are inherently robust and suited to being mounted under tension.

ATRef is supplied as a system with a separate identical black backing layer for enhanced contrast and no light transfer to the surface behind the screen. All measurements made as system with both layers in place.

ATRef Key Data | view full datasheet

Material Type: Front Projection
Maximum Size: 1.7m x 50m Seamless
Peak Gain: 0.91
Half Gain: Lambertian Diffuser
Minimum Throw Distance: No Minimum
Edge Blending Properties: Excellent
Required Audio EQ Pending

ImagePro

Image Professional Image Surface from DT Screens is a multi-layer surface with tightly knitted surface core with a dense black coating applied to the rear side delivering perfect flatness and uniformity and an outstandingly consistent spectral response.

ImagePro Key Data | view full datasheet

Material Type: Front Projection
Maximum Size: 5m x 50m Seamless
Peak Gain: 0.93
Half Gain: Lambertian Diffuser
Minimum Throw Distance: No Minimum
Edge Blending Properties: Excellent

ImageRef 

Image Reference Image Surface from DT Screens is a unique PVC formulation delivering exceptional uniformity and outstandingly consistent spectral response.

ImageRef Key Data| view full datasheet

Material Type: Front Projection
Maximum Size: Unlimited Invisible Seaming
Peak Gain: 0.99
Half Gain: Lambertian Diffuser
Minimum Throw Distance: No Minimum
Edge Blending Properties: Excellent

Hardware

MASK POSITION LOGIC

DT Screens Mask Position Logic is a combination of technologies for easy and accurate masking. The screen masking control system is factory programmed with the width, height and masking configuration of the screen.

A special sensor accurately measures the position of the mask bars and reports that to the screen masking control system which uses that data to precisely position the masks at any aspect ratio from 1.33 to 2.76:1 depending on the masking configuration.

WHISPERTEC MOTOR

DT Screens unique WhisperTec motors have been designed specifically for our Dynamic series. Each heavy-duty motor runs at less than 30dB for smooth and quiet operation for the lifetime of the screen.

FRONT LOADING IMAGE SURFACE

All DT Screens image surfaces are mounted from the front and only once the screen is securely attached to the wall.

VEBLACK MAGNETIC FRONT FRAME

DT Screens Frontier and Dynamic series feature magnetically mounted front frames clad in our veBlack light absorbing material. The magnetic front frames mount after the image surface enabling easy installation and removing the need to install these elements until the very end of the project.

SILENT GLIDE LINEAR MASK BEARINGS

Dynamic series masks are mounted securely to silent and smooth running linear bearings. This ensures the quietest and most accurate masking solution possible with no judder or loss of mask alignment.

CONSTANT TENSION MASK SYSTEM

Dynamic series masks are pulled towards the center of the screen using our innovative constant tension system. Each end of the masking bar has exactly equal force applied to it ensuring no loss of mask alignment and easing the work of the WhisperTec Motors.

FLOATING ANTI-JAM MASK BAR

Dynamic series use a special mask bar that is designed to avoid flex whilst remaining compact. This mask bar is fitted to a 3D printed mounting interface which allows the bar to float. Critically, this allows the mask bar to easily self adjust for best motion avoiding judder and loss of alignment.